EPJ Web Conf.
Volume 143, 2017EFM16 – Experimental Fluid Mechanics 2016
|Number of page(s)||5|
|Published online||12 May 2017|
The effectiveness of vibration damper attached to the cable due to wind action
Department of Building Construction, University of Science and Technology in Bydgoszcz, ul. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
* Corresponding author: firstname.lastname@example.org
Published online: 12 May 2017
In the paper the analysis of vibration of cable with attached damper is performed. Source of vibrations comes from the wind. The level of reduction of vibrations is also analysed. Damper attached to the cable is characterized by mass, stiffness and damping ratio. The paper also presents the equations of motion for the cable with damper, taking into account the initial parameters: cable cross-section and the location of the damper. The analysis is performed in time domain. It is discussed that in real situations the different types of cable vibration due to their amplitudes and frequencies is met: short-term oscillations of high amplitude, caused by a single impulse force, called bouncing cable, low amplitude and low wave length and the high frequency, called aeolian vibration, large oscillation amplitude, long wave length and low frequency, called galloping or dancing cables.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.