| Issue |
EPJ Web Conf.
Volume 143, 2017
EFM16 – Experimental Fluid Mechanics 2016
|
|
|---|---|---|
| Article Number | 02102 | |
| Number of page(s) | 6 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201714302102 | |
| Published online | 12 May 2017 | |
https://doi.org/10.1051/epjconf/201714302102
Feasibility and accuracy assessment of light field (plenoptic) PIV flow-measurement technique
1 Heat and Fluid Dynamics Laboratory, IHI Corporation, 1 Shin-Nakahara-cho, Yokohama - 2358501, Japan
2 Department of Mechanical Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Tokyo - 1528550, Japan
* Corresponding author: chandra_shekhar@ihi.co.jp
Published online: 12 May 2017
A light field camera can enable measurement of all the three velocity components of a flow field inside a three-dimensional volume when implemented in a PIV measurement. Due to the usage of only one camera, the measurement procedure gets greatly simplified, as well as measurement of the flows with limited visual access also becomes possible. Due to these advantages, light field cameras and their usage in PIV measurements are actively studied. The overall procedure of obtaining an instantaneous flow field consists of imaging a seeded flow at two closely separated time instants, reconstructing the two volumetric distributions of the particles using algorithms such as MART, followed by obtaining the flow velocity through cross-correlations. In this study, we examined effects of various configuration parameters of a light field camera on the in-plane and the depth resolutions, obtained near-optimal parameters in a given case, and then used it to simulate a PIV measurement scenario in order to assess the reconstruction accuracy.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.