Issue |
EPJ Web Conf.
Volume 143, 2017
EFM16 – Experimental Fluid Mechanics 2016
|
|
---|---|---|
Article Number | 02117 | |
Number of page(s) | 8 | |
Section | Contributions | |
DOI | https://doi.org/10.1051/epjconf/201714302117 | |
Published online | 12 May 2017 |
https://doi.org/10.1051/epjconf/201714302117
Investigation of flow in axial stage of experimental turbine
1 Aerospace Research and Test Establishment, Plc., Beranových 130, 19905 Prague – Letňany, Czech Republic
2 Dossan Škoda Power Co., Ltd., Tylova 1/57, 30128 Plzeň, Czech Republic
* Corresponding author: straka@vzlu.cz
Published online: 12 May 2017
The contribution deals with investigation of flow in the axial stage of the experimental turbine with reaction blading. The main intention is to evaluate an effect of the secondary flows on the efficiency. Most important source of the secondary flows is an outflow from the seal above the rotor shroud. Other sources of the secondary flows are axial gaps between the rotor disc and the side walls of the stator blade channel and the outlet diffuser. Results of the numerical simulation are compared with the experimental data. In this work there is also studied possibility of transfer the outlet dissipation structures at the inlet of the stage as an approach to modelling of the multistage configuration.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.