EPJ Web Conf.
Volume 153, 2017ICRS-13 & RPSD-2016, 13th International Conference on Radiation Shielding & 19th Topical Meeting of the Radiation Protection and Shielding Division of the American Nuclear Society - 2016
|Number of page(s)||6|
|Section||1. Nuclear Data, Radiation Detection, Measurements & Dosimetry|
|Published online||25 September 2017|
Ionization Quenching Factor measurement of 1 keV to 25 keV protons in Isobutane gas mixture
1 Institut de Radioprotection et de Sureté Nucléaire (IRSN), PRP-HOM/SDE/LMDN, 13115 Saint Paul Lez Durance, France
2 Laboratoire de Physique Subatomique et de Cosmologie, 38000 Grenoble, France
3 Institut de Radioprotection et de Sureté Nucléaire (IRSN), PSN-RES/SA2I/LIE, 13115 Saint Paul lez Durance, France
Published online: 25 September 2017
The French Institute for Radiation protection and Nuclear Safety (IRSN) is providing reference neutron fluence energy distribution at its standard monoenergetic neutron fields, produced at the AMANDE facility. The neutron energy is assessed by measuring the recoil nuclei energy in a μTPC detector, the LNE-IRSN/MIMAC detector. The knowledge of the ionization quenching factor (IQF) is fundamental to determine the kinetic energy of the recoil nuclei. For some various gases and pressures, discrepancies of about 15% were observed between IQF calculations using the SRIM software and experimental measurements. No data are available for the iC4H10 + 50% CHF3 gas mixture which are used for measurements from a few keV up to 565 keV neutron energies in the μTPC detector. The experimental determination of the IQF is of primary importance to provide reference neutron fluence energy distribution. After a short description of the experimental set-up, this paper presents the first results of the IQF measurements in a iC4H10 + 50% CHF3 gas mixture in the energy range 1 keV – 25 keV.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.