EPJ Web Conf.
Volume 153, 2017ICRS-13 & RPSD-2016, 13th International Conference on Radiation Shielding & 19th Topical Meeting of the Radiation Protection and Shielding Division of the American Nuclear Society - 2016
|Number of page(s)||6|
|Section||4. Medical Facilities, Radiotherapy & Medical Applications, Space Dosimetry & Shielding|
|Published online||25 September 2017|
Neutron transport calculation for Activation Evaluation for Decommissioning of PET cyclotron Facility
1 Tokyo Nuclear Services Co. LTD, 1-3-5, Taito, Taito-ku Tokyo, 110-0016, Japan ;
2 KEK, the High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki , 305-0801 Japan ;
3 Dokkyo Medical. University, 880 Kita-Kobayashi, Mibu-machi, Shimotsuga-gun Tochigi , 321-0293, JAPAN ;
* Corresponding author: email@example.com
Published online: 25 September 2017
In order to evaluate the state of activation in a cyclotron facility used for the radioisotope production of PET diagnostics, we measured the neutron flux by using gold foils and TLDs. Then, the spatial distribution of neutrons and induced activity inside the cyclotron vault were simulated with the Monte Calro calculation code for neutron transport and DCHAIN-SP for activation calculation. The calculated results are in good agreement with measured values within factor 3. Therefore, the adaption of the advanced evaluation procedure for activation level is proved to be important for the planning of decommissioning of these facilities.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.