| Issue |
EPJ Web Conf.
Volume 159, 2017
XIV All-Russian School-Conference of Young Scientists with International Participation “Actual Problems of Thermal Physics and Physical Hydrodynamics”
|
|
|---|---|---|
| Article Number | 00018 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/epjconf/201715900018 | |
| Published online | 25 October 2017 | |
https://doi.org/10.1051/epjconf/201715900018
Studying the effect of fire retardant coating on the fire hazard characteristics of wood using infrared thermography
National Research Tomsk State University, 36 Lenin Ave., Tomsk, 634050, Russia
* Corresponding author: denkasymov@gmail.com
Published online: 25 October 2017
This paper represents a study concerning the effect of fire retardant treatment «FUKAM» on the fire hazard characteristics of pine, aspen and larch. The front of model ground fire was investigated to estimate its effect on the surface of wood samples. Infrared thermography was used as a diagnostic method. The surface temperature distribution was obtained for the test wood samples after exposure to a fire front that was modeled using pine needles. The probability of ignition was estimated for the chosen experimental parameters for each kind of wood. The fire hazard characteristics of wood after fire retardant treatment showed a significant reduction in the surface temperature and the resistance to fire for the chosen parameters of the experiment compared to the same untreated samples.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.