| Issue |
EPJ Web Conf.
Volume 159, 2017
XIV All-Russian School-Conference of Young Scientists with International Participation “Actual Problems of Thermal Physics and Physical Hydrodynamics”
|
|
|---|---|---|
| Article Number | 00046 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/epjconf/201715900046 | |
| Published online | 25 October 2017 | |
https://doi.org/10.1051/epjconf/201715900046
An experimental model of the evaporative cooling system of a single powerful LED
Kutateladze Institute of Thermophysics SB RAS, 630090, 1 Lavrentyev Ave., Novosibirsk, Russia
Novosibirsk state University, 630090, 2 Pirogova Str., Novosibirsk, Russia
Published online: 25 October 2017
An experimental model of the evaporative cooling system of a single powerful LED with a natural circulation of the coolant capable of removing a heat flux density of more than 1 kW / cm2 is created. It is shown that on the finned surfaces the overheating relative to the saturation temperature in comparison with a smooth surface decreases up to three times for the heater with a diameter of 5 mm. There is up to two times increase in heat transfer coefficient on finned surfaces as compared to the smooth ones. For finned surfaces on the heater with a diameter of 1 mm the surface overheating relative to the saturation temperature decreases in four times. More than three times increase is observed for the heat transfer coefficient on finned surfaces as compared to the smooth ones.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.