EPJ Web Conf.
Volume 162, 2017International Conference on Applied Photonics and Electronics 2017 (InCAPE2017)
|Number of page(s)||4|
|Published online||22 November 2017|
Influence of fiber parameters to the erbium-doped fiber amplifier (EDFA) gain: A theoretical modeling
Research Centre for Applied Electromagnetics, Universiti Tun Hussein Onn Malaysia (UTHM), Batu Pahat, Johor, Malaysia.
2 Faculty of Electrical and Electronic Engineering, Universiti Tun Hussein Onn Malaysia (UTHM), Batu Pahat, Johor, Malaysia.
* Corresponding author: firstname.lastname@example.org
Published online: 22 November 2017
This paper studies the theoretical analysis of erbium-doped fiber (EDF) amplification. The EDF amplification is investigated in order to understand its behavior and identify the relevant parameters that are used for formulating the amplification process related to spontaneous and stimulated emission. Results show that under certain condition, the selected fiber parameters such as fiber length, EDF pump power, signal power and pump direction would significantly contribute to the EDFA gain enhancement.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.