| Issue |
EPJ Web Conf.
Volume 174, 2018
4th International Conference on Micro Pattern Gaseous Detectors (MPGD 2015)
|
|
|---|---|---|
| Article Number | 01013 | |
| Number of page(s) | 4 | |
| Section | Applications | |
| DOI | https://doi.org/10.1051/epjconf/201817401013 | |
| Published online | 21 February 2018 | |
https://doi.org/10.1051/epjconf/201817401013
Design, construction and quality control of resistive-Micromegas anode boards for the ATLAS experiment
1
CERN, Geneva (CH)
2
Bayerische Julius Maximilians Universität Würzburg (DE)
a e-mail: fabian.kuger@cern.ch
Published online: 21 February 2018
For the upcoming upgrade of the forward muon stations of the ATLAS detector, 1280m2 of Micromegas chambers have to be constructed. The industrialization of anode board production is an essential precondition. Design and construction methods of these boards have been optimized towards mass production. In parallel quality control procedures have been developed and established. The first set of large size Micromegas anode boards has finally been produced in industries and demonstrates the feasibility of the project on full-scale.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.