| Issue |
EPJ Web Conf.
Volume 180, 2018
EFM17 – Experimental Fluid Mechanics 2017
|
|
|---|---|---|
| Article Number | 02001 | |
| Number of page(s) | 8 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201818002001 | |
| Published online | 04 June 2018 | |
https://doi.org/10.1051/epjconf/201818002001
Vortex valve
VÚTS Liberec, a.s., Department of Flow Simulations, Svárovská 619, 46001 Liberec, Czech Republic
* Corresponding author: k.adamek@volny.cz
Published online: 4 June 2018
The paper deals with a flow field inside the so-called vortex valve, used as an outlet device on retention reservoirs for retention of rainstorms and later slow outflow into sewerage etc. The system is very simple, without moving parts. Using the method of numerical flow simulation, the unusual flow characteristic Δp = f(Q), containing two branches, is explained. Further, there it is studied influence of both inlet/outlet opening sizes on the form of the characteristic. Results can be used for designing the new model series of valves for various flows.
Key words: Flow numerical simulation / Vortex valve / Flow characteristic
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.