Issue |
EPJ Web Conf.
Volume 180, 2018
EFM17 – Experimental Fluid Mechanics 2017
|
|
---|---|---|
Article Number | 02039 | |
Number of page(s) | 6 | |
Section | Contributions | |
DOI | https://doi.org/10.1051/epjconf/201818002039 | |
Published online | 04 June 2018 |
https://doi.org/10.1051/epjconf/201818002039
Compiled visualization with IPI method for analysing of liquid liquid mixing process
1
Department of physical measurements, Institute for Nanomaterials, Advanced Technology and Innovation, Studentska 1402/2 460 01 Liberec 1, Czech Republic
2
Institute of Hydrodynamics AS CR, v. v. i., Pod Patankou 30/5, 166 12 Prague 6, Czech Republic
3
Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Process Engineering, Technicka 4, 166 07 Prague, Czech Republic
* Corresponding author: darina.jasikova@tul.cz
Published online: 4 June 2018
The article deals with the research of mixing process using visualization techniques and IPI method. Characteristics of the size distribution and the evolution of two liquid-liquid phase's disintegration were studied. A methodology has been proposed for visualization and image analysis of data acquired during the initial phase of the mixing process. IPI method was used for subsequent detailed study of the disintegrated droplets. The article describes advantages of usage of appropriate method, presents the limits of each method, and compares them.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.