EPJ Web Conf.
Volume 180, 2018EFM17 – Experimental Fluid Mechanics 2017
|Number of page(s)||12|
|Published online||04 June 2018|
Wind tunnel for studies of latent heat storage
Institute of Thermomechanics v.v.i., Czech Academy of Sciences, Dolejškova 5, 182 00 Praha-Kobylisy, Czech Republic
a Corresponding author: firstname.lastname@example.org
Published online: 4 June 2018
When a heated solid body temperature reaches the melting point, temperature stops increasing and remains constant until the whole body is completely molten. The heat input during this melting is spent on freeing the body molecules. This latent heat of melting remains inside the body and may be released when the body is cooled and solidifies. This heat was suggested, already several decades ago, for storing thermal energy. The advantage it offers is avoiding high temperature differences - which otherwise decrease effectiveness of storage (by inevitable heat escape by conduction). Also the mass of the body needed to store a given amount of heat is much smaller. For investigations of the melting and solidification processes a special wind tunnel has been designed and is being built in this study. The tested sample of phase change material, encapsulated in a spherical shell, will be exposed in the tunnel to recirculating hot air flow in a 140 mm x 140 mm test section. Sudden decrease in air flow temperature is made by shifting away the whole closed-circuit part of the tunnel and exposing the test section to flow of cold (room temperature) air.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.