| Issue |
EPJ Web Conf.
Volume 180, 2018
EFM17 – Experimental Fluid Mechanics 2017
|
|
|---|---|---|
| Article Number | 02112 | |
| Number of page(s) | 8 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201818002112 | |
| Published online | 04 June 2018 | |
https://doi.org/10.1051/epjconf/201818002112
On 3D Flow Structure of the Boundary Layer on the Suction Side of a Plate
1
Institute of Thermomechanics, ASCR, v.v.i., Dolejškova 5, Praha 8, CR
2
UWB, Faculty of Mechanical Engineering, Department of Power System Engineering, Universitní 8, Plzeň, CR
* Corresponding author: uruba@it.cas.cz
Published online: 4 June 2018
Experimental study of the structure of the boundary layer on the suction side of a plate is to be presented. The flat plate with rounded edges and angle of attack of 7° is used. The boundary layer flow will be explored using the time-resolved PIV technique, measuring plane was located very close to the wall. Analysis of the flow dynamics is to be presented using the POD technique applied on both velocity and vorticity fields.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.