| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 02012 | |
| Number of page(s) | 6 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/201818302012 | |
| Published online | 07 September 2018 | |
https://doi.org/10.1051/epjconf/201818302012
High strain rate behaviour of fiber reinforced concrete
1
SVS FEM s.r.o.,
Škrochova 42,
615 00,
Brno,
Czech Republic
2
Výzkumný ústav stavebních hmot, a. s.,
Hněvkovského 65,
617 00
Brno,
Czech Republic
* Corresponding author: mpopovic@svsfem.cz
Published online: 7 September 2018
The results of dynamic compression and tensile-splitting tests of concrete reinforced by randomly distributed short non – metallic fibres are presented. A Split Hopkinson Pressure Bar combined with a high-speed photographic system, was used to conduct dynamic Brazilian tests. Quasi static test show that the reinforcement of concrete by the non-metallic fibres leads to the improvement of mechanical properties at quasi static loading. This phenomenon was not observed at the high strain rate loading .Some explanation of this result is briefly outlined.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.