| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 02035 | |
| Number of page(s) | 6 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/201818302035 | |
| Published online | 07 September 2018 | |
https://doi.org/10.1051/epjconf/201818302035
Dynamic properties of stainless steel under direct tension loading using a simple gas gun
1
Research Institute of Mechanics, National Research Lobachevsky State University of Nizhny Novgorod,
603022,
Russia
2
Military University of Technology, Civil Engineering and Geodesy Faculty,
00-908
Warsaw,
Poland
* Corresponding author: bragov@mech.unn.ru
Published online: 7 September 2018
The combined experimental and theoretical approach was applied to the study of high-speed deformation and fracture of the 1810 stainless steel. The material tests were performed using a split Hopkinson pressure bar to determine dynamic stress-strain curves, strain rate histories, plastic properties and fracture in the strain rate range of 102 ÷ 104 s-1. A scheme has been realized for obtaining a direct tensile load in the SHPB, using a tubular striker and a gas gun of a simple design. The parameters of the Johnson-Cook material model were identified using the experimental results obtained. Using a series of verification experiments under various types of stress-strain state, the degree of reliability of the identified mathematical model of the behavior of the material studied was determined.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.