EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Dynamic perforation and compression tests of PMMA for a wide range of temperatures - experimental and preliminary numerical analysis
Universiapolis, Technical University of Agadir,
2 University of Lorraine, Laboratory of Microstructure Studies and Mechanics of Materials (LEM3), Metz, France
3 Poznan University of Technology, Institute of Structural Engineering, Poznan, Poland
4 University of Lorraine, Laboratory of Polymers Characterization, Faulquemont, France
* Corresponding author : firstname.lastname@example.org
Published online: 7 September 2018
Experimental tests were carried out on poly(Methyl Methacrylate) (PMMA) in order to define its mechanical behaviour over a wide range of temperature. To reach high strain rate, perforation tests were performed within a wide range of temperatures using a high-performance oven, from room temperature to 130 °C, above the glass transition temperature Tg. In addition, the results were confronted with compression tests previously obtained. Based on experiments, the temperature transition between fragile and ductile was defined. The material became fully ductile above 118 °C inducing no cracking and debris during the perforation process. The yield stress evolution as function of strain rate for various temperatures was modelled by using the cooperative model. The model predictions were in agreement with experimental data. Two material models developed by Richeton and Nasraoui were analysed, the latter was then implemented into the FE model to simulate perforation tests for a wide range of temperatures and strain rates. It was observed that the coupling strain rate-temperature is a key factor to predict the structure behaviour not only in terms of material behaviour but also in terms of dynamic failure.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.