EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||4|
|Published online||07 September 2018|
Comparison of dynamic tensile extrusion behaviour of WCu composites made by different processes
The 4th Research and Development Institute, Agency for Defence Development,
Republic of Korea
2 Weapon Systems Engineering, Korea University of Science and Technology, 34113 Daejeon, Republic of Korea
* Corresponding author: email@example.com
Published online: 7 September 2018
Composites with 60~90% of tungsten are used in liners of some specialty shaped charges. The penetration is enhanced by a factor against copper for homogeneous steel target. Tungsten powder based shaped charge liners are also especially suitable for oil well completion. In this study, WCu composites manufactured by different process are used for testing of dynamic tensile extrusion (DTE) behaviour. One samples were made by copper infiltrated method. The other samples were manufactured by metal injection molding methods with reduced tungsten copper composite powder. DTE tests were carried out by launching the sphere samples (Dia. 7.62mm) to the conical extrusion die at a speed of ~375m/s. The DTE fragmentation behaviour of tungsten copper composites after soft-recovered were examined and compared with each other.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.