EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||4|
|Published online||07 September 2018|
Dynamic deformation evolution of the adiabatic shear bands in zirconium alloy formed at a strain rate of about 2300 s-1
Institute of Materials, China Academy of Engineering Physics,
* Corresponding author: email@example.com
Published online: 7 September 2018
Deformed microstructure of the adiabatic shear bands in zirconium alloy impacted by split Hopkinson pressure bar at a strain rate of about 2300 s-1 was characterized systemically. Four different strains of zirconium alloy subjected to impact loading at same strain rate were designed by means of strain stopper rings. At a strain of 0.30, the transformed bands were distinguished at the tip of crack. The transformed bands mainly composed of the ultrafine and equiaxed grains with the mean diameter of about 100~300 nm were found by a dual beam FIB/TEM system. Besides ultrafine grains in the transformed bands, nanometer fine grain was observed and confirmed by HRTEM. Thus, the transformed bands mainly composed of the mixed microstructure including nanometer and ultrafine grains were confirmed, and n phase transformation and amorphization in transformed bands take place.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.