EPJ Web Conf.
Volume 185, 2018Moscow International Symposium on Magnetism (MISM 2017)
|Number of page(s)||4|
|Section||High Frequency Properties, Magnetization Dynamics, Magnetophotonics|
|Published online||04 July 2018|
Experimental study of microwave properties of composites filled with Permalloy powder
Institute for Theoretical and Applied Electromagnetics RAS
* Corresponding author: email@example.com
Published online: 4 July 2018
Frequency dependencies of permittivity and permeability of composites filled with Permalloy powder with various concentrations and shapes of particles have been measured and discussed. The powder particles of various shapes were obtained by mechanical milling of industrial Permalloy powder in organic media. Paraffin wax was used as a matrix for producing the composites. A shape data of the particles was obtained with an electron microscope. The permittivity and permeability were measured in the frequency range of 0.13 to 10 GHz. The shape of the particles changes from sphere to platelet with increase of milling time. The change leads to a shift of the ferromagnetic resonance (FMR) frequency and magnetic loss peak. It is shown that for larger particles, a decrease of the Q-factor of the ferromagnetic resonance is observed, which is explained by the strong influence of the skin effect. With increase of the concentration of the Permalloy particles in composite, the magnetic loss peak shifts to low frequencies. When the spherical particles are flattened, the resonance frequency shifts to high frequencies, which indicates that the shift to high frequencies due to the decrease of the skin effect and the change in the magnetic structure is stronger than the shift to the low frequencies by changing the shape and reducing the demagnetization.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.