EPJ Web Conf.
Volume 204, 2019XXIV International Baldin Seminar on High Energy Physics Problems “Relativistic Nuclear Physics and Quantum Chromodynamics” (Baldin ISHEPP XXIV)
|Number of page(s)||7|
|Section||Applied Use of Relativistic Beams|
|Published online||03 April 2019|
Experimental investigation and Monte Carlo simulations of radionuclide production inside the Uranium spallation target QUINTA irradiated with a 660-MeV proton beam
1 Joint Institute for Nuclear Research, Joliot-Curie 6, 141 980 Dubna, Russia
2 Nuclear Physics Institute of the ASCR PRI, Hlavní 130, 250 68 Řež, Czech Republic
3 Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Břehová 7, 115 19 Prague 1, Czech Republic
4 Faculty of Electrical Engineering and Communication, Brno University of Technology, Technická 3058/10, 616 00 Brno, Czech Republic
5 Institute for Advanced Studies "OMEGA", Universitetskaya 19, 141 980 Dubna, Russia
6 Faculty of Mathematics and Physics, Charles University, Ke Karlovu 3, 121 16 Prague 2, Czech Republic
1 e-mail: firstname.lastname@example.org
Published online: 3 April 2019
The accelerator-Driven-System (ADS) is very important to study the neutron field and radionuclide production inside simple-geometry uranium subcritical setups irradiated with high energy particle beams. A subcritical setup QUINTA was irradiated with the 660-MeV proton beam from Phasotron accelerator at the Joint Institute for Nuclear Research (JINR). The radionuclide production in the region along the beam axis was investigated by the activation technique. The aim was to compare (n,x) with (p,x) reactions using activation detectors of 59Co and natPb, and compare experimental results with the calculated results using Monte Carlo simulation code MCNPX 2.7.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.