EPJ Web Conf.
Volume 204, 2019XXIV International Baldin Seminar on High Energy Physics Problems “Relativistic Nuclear Physics and Quantum Chromodynamics” (Baldin ISHEPP XXIV)
|Number of page(s)||5|
|Published online||03 April 2019|
Study of electric field in SiPM active volume by the volt-farad characteristics analysis
1 Nuclear Physics Institute of the CAS, 25068 Řež, Czech Republic
2 JINR/LHEP, Dubna, Russia
* e-mail: firstname.lastname@example.org
Published online: 3 April 2019
The purpose of this study is to understand the change of the SiPM structure after irradiation. We compared the profile of the electric field in the SiPM (KETEK) active region for ten not-irradiated and irradiated detectors. The standard method of measurement of C-V characteristics was applied using two configurations (serial and parallel circuit) to exclude the influence of the serial resistance. Dependencies of capacitance on the frequency were studied in the range from 10 to 1000 KHz. For non-irradiated detectors we detected in CV characteristics the local instability basically connected with accumulation of charge on boundary optical isolation-silicon. In addition, the hysteresis of CV characteristics was detected. For irradiated detectors the local instability was visible as well but the hysteresis of CV characteristics was not detected. The results demonstrate that the applied method can be used for the relative analysis of how SiPM active region properties changed after irradiation.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.