EPJ Web Conf.
Volume 213, 2019EFM18 – Experimental Fluid Mechanics 2018
|Number of page(s)||6|
|Published online||28 June 2019|
Comparison and Mathematical Modelling of Leakage Tests
VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Hydrodynamics and Hydraulic Equipment, 17. listopadu 15/2172, Ostrava 70833, Czech Republic
a Corresponding author: firstname.lastname@example.org
Published online: 28 June 2019
Leak tests are used in many industrial applications, a typical example are the headlights of cars. In these tests are use different principles and different working media. The monitored parameters are usually the amount of leakage media depending on the pressure drop and the time at which the leakage occurs. The article describes the possibility of performing leak tests using compressed air, their comparison and the subsequent creation of mathematical models.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.