EPJ Web Conf.
Volume 213, 2019EFM18 – Experimental Fluid Mechanics 2018
|Number of page(s)||6|
|Published online||28 June 2019|
Comparison of different image intensifiers used for combustion measurement
CTU in Prague, FME, Department of Automotive, Combustion Engine and Railway Engineering, 16607 Prague, Czech Republic
2 CTU in Prague, FME, Department of Fluid Mechanics and Thermodynamics, 16607 Prague, Czech Republic
3 J. E. Purkyně University in Ústí nad Labem, FME, Department of Machines and Mechanics, 400 01 Ústí nad Labem, Czech Republic
4 CTU in Prague, FME, Department of Process Engineering, 16607 Prague, Czech Republic
* Corresponding author: Jan.Kouba@fs.cvut.cz
Published online: 28 June 2019
This paper deals with setting of the acquisition equipment used to visualize and measure the concentration of intermediate species chemiluminescence combustion and laser-induced fluorescence. Observed intermediates such as OH, NO, CH and others have an emitted UV spectrum and their signal is very weak. For this reason, it is necessary to use a suitable image intensifier, and its proper setting and synchronization with the camera is also very important. In view of this problem, the following text deals with the appropriate setting of selected optical amplifiers with P46 and P43. Because the recording equipment can be used for both LIF and chemiluminescence, the experimentally determined setting will be performed using the OH-chemiluminescence method. This is reported by a weaker signal and creates a more stringent setup criterion. As a qualitative factor, a gradient of the image function has been selected, which plays a significant role in edge detection and therefore also in flame front position detection.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.