EPJ Web Conf.
Volume 214, 201923rd International Conference on Computing in High Energy and Nuclear Physics (CHEP 2018)
|Number of page(s)||7|
|Section||T1 - Online computing|
|Published online||17 September 2019|
Open-Hardware and Application Specific Design for the Monitoring System of the Belle II Forward/Backward Electromagnetic Calorimeter
University of Naples, “Federico II”,
via Cinthia 80126 Napoli,
2 Istituto Nazionale di Fisica Nucleare, Sez. di Napoli, via Cinthia 80126 Napoli, Italy
3 Istituto Nazionale di Fisica Nucleare, Sez. di Roma, Piazz.le A. Moro 00100, Roma Italy
4 Istituto Nazionale di Fisica Nucleare, Sez. di Roma Tre, Via della Vasca Navale 00100, Roma Italy
* Corresponding author: email@example.com
Published online: 17 September 2019
Control and monitoring of experimental facilities as well as laboratory equipment requires handling a blend of different tasks. Often in industrial or scientific fields there are standards or form factor to comply with and electronic interfaces or custom busses to adopt. With such tight boundary conditions, the integration of an off-the-shelf Single Board Computer (SBC) is not always a possible or viable alternative. The availability of electronic schematics and PCBs with open-source Hardware license for various SBCs overcomes such integration problems, making feasible the implementation of a custom architecture composed by a central core inherited from a vendor reference design (most likely the microprocessor, static RAM and flash memory) augmented with application-specific integrated circuits and hardware resources, in order to handle the requirements of the specific environment. The user is then able to exploit most of the supported tools and software provided by opensource community, fulfilling all the constraints enforced by his environment. We have used such an approach for the design and development of the monitoring system of the endcap electromagnetic calorimeter of the Belle II experiment, presently running at KEK Laboratory (Tsukuba, Japan). Here we present and discuss the main aspects of the hardware architectures and noise performances tailored on the needs of a detector designed around CsI crystal scintillators.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.