EPJ Web Conf.
Volume 214, 201923rd International Conference on Computing in High Energy and Nuclear Physics (CHEP 2018)
|Number of page(s)||6|
|Section||T1 - Online computing|
|Published online||17 September 2019|
FELIX: the new detector interface for the ATLAS experiment
Radboud University Nijmegen,
2 Nikhef, Science Park 105, 1098 XG Amsterdam, Netherlands
3 University of California Irvine, Irvine, CA 92697, USA
* Corresponding author: Nikolina.Ilic@cern.ch
Published online: 17 September 2019
During the next major shutdown from 2019-2020, the ATLAS experiment at the LHC at CERN will adopt the Front-End Link eXchange (FELIX) system as the interface between the data acquisition, detector control and TTC (Timing, Trigger and Control) systems and new or updated trigger and detector front-end electronics. FELIX will function as a router between custom serial links from front end ASICs and FPGAs to data collection and processing components via a commodity switched network. Links may aggregate many slower links or be a single high bandwidth link. FELIX will also forward the LHC bunch-crossing clock, fixed latency trigger accepts and resets received from the TTC system to front-end electronics. The FELIX system uses commodity server technology in combination with FPGA-based PCIe I/O cards. The FELIX servers will run a software routing platform serving data to network clients. Commodity servers connected to FELIX systems via the same network will run the new Software Readout Driver (SW ROD) infrastructure for event fragment building and buffering, with support for detector or trigger specific data processing, and will serve the data upon request to the ATLAS High-Level Trigger for Event Building and Selection. This proceeding will cover the design and status of FELIX and the SW ROD.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.