EPJ Web Conf.
Volume 215, 2019EOS Optical Technologies
|Number of page(s)||2|
|Section||Manufacturing, Tolerancing and Testing of Optical Systems (MOS) – Session 1|
|Published online||10 September 2019|
Development of a Cost-Efficient Computer Controlled Optical Surfacing Process for Correcting Aspheric Lenses using Tool Influence Function based Dwelltime Optimization
Edmund Optics Singapore Pte. Ltd., 18 Woodlands Loop #04-00, Singapore, Singapore
* e-mail: firstname.lastname@example.org
Published online: 10 September 2019
A Computer Controlled Optical Surfacing (CCOS) system has been developed for correcting form errors on aspheric surfaces. Experiments were carried out to find the correlation between diﬀerent polishing parameters and polishing metrics such as removal rate, uniformity etc. Based on established polishing parameters, polishing process is developed to correct surface errors on planar, spherical and aspheric surfaces. A convolution model between TIF and dwell times was developed to simulate and solve for correction polishing. Surface accuracies of peak-to-valley (PV) 141 nm and root-mean-squared (RMS) 22 nm has been achieved for planar surface. For aspheric surface, current accuracy of 662 nm PV and of 115 nm RMS is achieved with further development ongoing.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.