EPJ Web Conf.
Volume 215, 2019EOS Optical Technologies
|Number of page(s)||2|
|Section||Joint Session (EOS MOS and SPIE OM) – Manufacturing, Tolerancing and Testing of Optical Systems (MOS) POSTERS|
|Published online||10 September 2019|
Fabrication of SiC Off-axis Aspheric Mirror by Using Robot Polishing
Institute of Optics and Electronics, Chinese Academy of Sciences, 610209 Chengdu, China
* Corresponding author: firstname.lastname@example.org
Published online: 10 September 2019
Two silicon carbide (SiC) lightweight off-axis aspheric mirrors were fabricated by using robot polishing technology. One is a primary mirror with dimension 380mm×328mm, the other is a tertiary mirror with dimension 294mm×238mm. The robot polishing technology is the combination of CCOS technology and a 6-axises industrial robot. The setup of robot polishing system is discussed, and the mirror aspheric grinding, surface polishing and figuring process are reported in this paper. The final surface shape error of primary mirror is 11.4nm RMS, and the tertiary is 12.1nm RMS. The capability of off-axis aspheric mirror fabricating on robot polishing system is verified.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.