EPJ Web Conf.
Volume 221, 2019XXVI Conference on Numerical Methods for Solving Problems in the Theory of Elasticity and Plasticity (EPPS-2019)
|Number of page(s)||7|
|Published online||30 October 2019|
Nucleation of twins and dislocations in V-Ti alloys under various straining conditions
Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of Sciences, 634055 Tomsk, Russian Federation
* Corresponding author: email@example.com
Published online: 30 October 2019
The features of plasticity nucleation in V-4Ti and V-16Ti crystallites under uniaxial tension and bilateral compression are studied. It is shown that the nucleation of plasticity in crystallites is associated with the formation of twins under uniaxial tension. During the development of plasticity, a screw dislocation cell structure is formed between twin plates. The strain and stress at which plasticity nucleates in the material decreases with increasing Ti concentration. It was found that the distribution pattern of Ti atoms in the initial structure has a significant effect on the elastic limit of the simulated crystallites. The plastic deformation of crystallites with 16% Ti under bilateral compression is realized only by the dislocation mechanism. This behavior of the material is due to the low value of the stress at the elastic limit, which is insufficient for the formation of twins.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.