| Issue |
EPJ Web Conf.
Volume 225, 2020
ANIMMA 2019 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
|
|
|---|---|---|
| Article Number | 03013 | |
| Number of page(s) | 11 | |
| Section | Nuclear Power Reactors Monitoring and Control | |
| DOI | https://doi.org/10.1051/epjconf/202022503013 | |
| Published online | 31 January 2020 | |
https://doi.org/10.1051/epjconf/202022503013
Dynamic Gamma Spectral Measurements of Primary Coolant and Piping at Various Operating Nuclear Power Plants
Mirion Technologies (Canberra) 800 Research Parkway
Meriden
CT USA
Published online: 31 January 2020
An on-going EPRI-supported project involves the use of a collimated CZT gamma spectroscopy detector for quantitative measurements of the gamma spectra from primary coolant piping at various times and locations at several operating NPPs. An automatic system − the Data Analyst − takes the spectra from the CZT, and analyzes it on a continuing repeating basis. Measurements are taken simultaneously covering different elapsed times; e.g. 10 minutes for viewing short dynamic events, and 10 hours for low detection limits. The detector is calibrated using the ISOCS mathematical efficiency calibration software, which allows the activity to be computed for a radioactive fluid inside the pipe, or radioactive surface contamination inside or outside the pipe. Measurements have been taken during the reactor shutdown cycle, during the startup cycle, and during continuous full power operations. Examples from these deployments and potential future uses for this technology are described.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.