Issue |
EPJ Web Conf.
Volume 225, 2020
ANIMMA 2019 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
|
|
---|---|---|
Article Number | 07011 | |
Number of page(s) | 8 | |
Section | Safeguards, Homeland Security | |
DOI | https://doi.org/10.1051/epjconf/202022507011 | |
Published online | 20 January 2020 |
https://doi.org/10.1051/epjconf/202022507011
Measurements and simulations to investigate the feasibility of neutron multiplicity counting in the current mode of fission chambers
Institute of Nuclear Techniques Budapest University of Technology and Economics,
H-1111
Budapest,
Hungary
Division of Subatomic and Plasma Physics Chalmers University of Technology,
SE-412 96
Göteborg,
Sweden
Centre for Energy Research Hungarian Academy of Sciences,
H-1525
Budapest,
114, POB 49,
Hungary
nagy.lajos@reak.bme.hu
imre@chalmers.se
pal.lenard@wigner.mta.hu
klujby@reak.bme.hu
szieberth@reak.bme.hu
Published online: 20 January 2020
In two earlier papers [1], [2] we investigated the possibility of extracting traditional multiplicity count rates from the cumulants of fission chamber signals in current mode. It was shown that if all neutrons emitted from the sample simultaneously are also detected simultaneously, the multiplicity rates can be retrieved from the first three cumulants of the currents of up to three detectors, but the method breaks down if the detections of neutrons of common origin take place with a time delay spread wider than the pulse shape. To remedy these shortcomings, in this work we extended the theory to two- and three-point distributions (correlations). It was found thatthe integrals of suitably chosen two- and three-point moments with respect to the time differences become independent of the probability density of the time delays of detections. With this procedure, the multiplicity rates can be retrieved from the detector currents for arbitrary time delay distributions. To demonstrate the practical applicability of the proposed method, a measurement setup was designed and built. The statistics (shape and amplitude distribution) of the detector pulse were investigated as important parameters of the theoretical model. Simulations were performed to estimate the expected value of the multiplicity rates in the built setup. Measurements were performed and two types of moments (the mean and the covariance function) of the recorded detector signals were calculated. Values of singles rates were successfully recovered.
Key words: nuclear safeguards / multiplicity counting / fission chambers
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.