Remote monitoring of Molten Core-Concrete Interaction experiment with Optical Fibre Sensors & perspectives to improve nuclear safety – DISCOMS project

CEA

^* Laurent.MAURIN@cea.fr
L. Maurin, G. Jouvin and S. Rougeault are with Institut LIST, CEA,Université Paris-Saclay, F-91120 Palaiseau, France (e-mail: laurent.maurin@cea.fr).
V. Bouyer, A. Denoix, C. Journeau, D. Molina and P. Tena are with the CEA, DEN, Cadarache, DTN, SMTA, LEAG, F-13108 Saint-Paul-lez-Durance, France (e-mail: viviane.bouyer@cea.fr).
Y. Ouerdane is with Univ Lyon, UJM, CNRS, IOGS, Laboratoire Hubert Curien, UMR 5516, 18 rue Prof. B. Lauras, F-42000 Saint-Étienne, France (e-mail: ouerdane@univ-st-etienne.fr).
P. Ferdinand, previously with Institut LIST, is now with LMP S.A., 49-51 rue du Moulin des Prés, F-75013 Paris, France (e-mail: p-ferdinandlmpsa@sfr.fr).

Published online: 20 January 2020

Abstract

The DISCOMS project (Distributed Sensing for Corium Monitoring and Safety) aimed at providing innovative solutions not requiring local electrical power supplies, for remote monitoring of a severe nuclear accident. The solutions are based on both long length SPNDs (Self Powered Neutron Detectors) and on distributed OFSs (Optical Fibre Sensors) capable to detect the onset of a severe accident, the corium pouring on the containment building concrete basemat, and its interaction with the concrete floor under the reactor vessel, until it spreads in the core catcher (EPR case). This paper mainly focuses on these last three detection targets achievable with distributed OFSs. It is based on the results of a Molten Core & Concrete Interaction (MCCI) experiment, namely VULCANO, held in June 2018 with a concrete crucible equipped with overall ~ 180 m long optical fibre sensing cables. This small scale experiment (50 kg of prototypical corium) has demonstrated the ability of distributed OFSs to remotely provide useful data during the MCCI run: i) temperature profiles images up to about 580°C (single wavelength Raman DTS reflectometer) until cooling down to room temperature, ii) high spatial-resolution frequency shifts profiles, due to combined (non-selective) strain and temperature influences (Rayleigh OFDR and Brillouin reflectometers), and iii) cables lengths ablated by the corium on sections weakened by the temperature (Raman DTS, Rayleigh OFDR, telecom and photon counting reflectometers).