| Issue |
EPJ Web Conf.
Volume 229, 2020
29th International Conference of the International Nuclear Target Development Society (INTDS2018)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 5 | |
| Section | Target Characterization | |
| DOI | https://doi.org/10.1051/epjconf/202022902002 | |
| Published online | 28 February 2020 | |
https://doi.org/10.1051/epjconf/202022902002
Surface and thickness measurement in the Targetlab of GSI
GSI Helmholtzzentrum für Schwerionenforschung, Targetlabor, Planckstrasse 1, 64291 Darmstadt, Germany
* Corresponding author: b.kindler@gsi.de
Published online: 28 February 2020
For characterization of targets and foils prepared at the target laboratory as well as for characterization of e.g. degrader or windows of internal customers, different analytical devices are available. Besides a lot of standard equipment, the target laboratory of GSI holds a 3D-measurement system (MicroProf®) equipped with optical sensors for measuring surface parameters as well as total thickness variations contact-free. In the paper the measuring principle including the possibilities and features of the MicroProf®-system are explained and some different applications are shown.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.