EPJ Web Conf.
Volume 238, 2020EOS Annual Meeting (EOSAM 2020)
|Number of page(s)||2|
|Section||Topical Meeting (TOM) 3- Optical System Design, Tolerancing and Manufacturing|
|Published online||20 August 2020|
Investigation of extended depth-of-field f/8 camera with optimized cubic phase mask and digital restoration
1 Optics Research Group, Dept. of Imaging Physics, Delft University of Technology, Lorentzweg 1, 2628 CJ, Delft, the Netherlands
2 Datalogic IP Tech S.r.l., Via San Vitalino 13, 40012, Calderara di Reno (BO), Italy
* Corresponding author: firstname.lastname@example.org
Published online: 20 August 2020
An investigation of extended depth-of-field camera with optimized phase mask and digital restoration is presented. The goal of this paper is to implement the wavefront coding technique without affecting much of the original design, and the design has taken the complexity of imaging system into consideration. The optimized strength of cubic phase mask (CPM) is based on the analytical optimal solution for the task-based imaging system [J. Opt. Soc. Am. A 25, 1064 (2008)]. The noisy intermediate images of CPM system with highest spatial frequency of interest can be effectively restored by vector-based Richardson-Lucy algorithm. Restoration from the system with generalized CPM produces precise image position than the system with CPM does. In general, the CPM system procures modulation transfer function higher than 0.195 in the whole depth-of-field, and the mean squared error of the restored images are less than 5 %.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.