Issue |
EPJ Web Conf.
Volume 238, 2020
EOS Annual Meeting (EOSAM 2020)
|
|
---|---|---|
Article Number | 03012 | |
Number of page(s) | 2 | |
Section | Topical Meeting (TOM) 3- Optical System Design, Tolerancing and Manufacturing | |
DOI | https://doi.org/10.1051/epjconf/202023803012 | |
Published online | 20 August 2020 |
https://doi.org/10.1051/epjconf/202023803012
Rotation-free industrial alignment of high performance optics
Berliner Glas KGaA Herbert Kubatz GmbH & Co., Waldkraiburger Str. 5, 12347 Berlin, Germany
* Corresponding author: dennis.leenman@berlinerglas.de
Published online: 20 August 2020
Conventional production methods for high precision lens alignment typically rely on lens rotation. In the case of rotationally non-symmetric optics and mounts, this is problematic. Here, we report a new concept for alignment bonding without lens rotation, based on a high precision linear bearing as position reference and a hexapod actuator for lens manipulation. For the optical axis of two test lenses after bonding, <1 arcmin element tilt and <10 μm decentre was achieved. This is confirmed by an independent measurement. Our alignment device and process can be applied for any lens and mount geometry. This will be especially useful for high-end products with small size and for rotationally non-symmetric systems.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.