EPJ Web Conf.
Volume 239, 2020ND 2019: International Conference on Nuclear Data for Science and Technology
|Number of page(s)||4|
|Section||Nuclear Reaction Measurements|
|Published online||30 September 2020|
Measurement of the neutron capture cross-section of 237Np using ANNRI at MLF/J-PARC
1 Tokyo Instutute of Technology, Laboratory for Advanced Nuclear Energy.
2 Japan Atomic Energy Agency.
Published online: 30 September 2020
The neutron capture-cross section of 237Np was measured using the Accurate Neutron-Nucleus Reaction Measurement Instrument (ANNRI) with special emphasis in the region of interest for the core design of Accelerator-Driven Systems (ADS), from 0.5 to 500 keV. A neutron time-of-flight method was employed using the NaI(Tl) spectrometer in the ANNRI beamline at the Japanese Proton Accelerator Research Complex (J-PARC) together with the pulse-height weighting technique. The cross-section was determined by normalizing the results to JENDL-4.0 cross-section data at the first resonance of 237Np. In the 0.5 to 500 keV range, the present preliminary results present better agreement with previous experiments of Weston et al . Experimental data from Esch et al  is about 15% lower than the present results. In comparision with evaluated data, ENDF/B-VIII.0 offers better agreement from 0.5 to 10 keV than with JENDL-4.0. From 0.5 to 10 keV JENDL-4.0 underestimates the present results by 10-15%. Nontheless, over 10 keV energy JENDL-4.0 shows good agreement up to 500 keV. The present preliminary cross-section has uncertainties of about 5% from 0.5 to 35 keV, a value lower than the uncertainties present in JENDL-4.0 of 6-10%. However, over 35 keV the total uncertainties steadily increase and amount to 10% at 500 keV.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.