| Issue |
EPJ Web Conf.
Volume 239, 2020
ND 2019: International Conference on Nuclear Data for Science and Technology
|
|
|---|---|---|
| Article Number | 01040 | |
| Number of page(s) | 4 | |
| Section | Nuclear Reaction Measurements | |
| DOI | https://doi.org/10.1051/epjconf/202023901040 | |
| Published online | 30 September 2020 | |
https://doi.org/10.1051/epjconf/202023901040
Neutron inelastic cross section measurements on 58,60Ni
1 Horia Hulubei National Institute for Physics and Nuclear Engineering, Reactorului 30, 077125 Bucharest-Măgurele
2 Université de Strasbourg, CNRS, IPHC UMR 7178, Strasbourg, France
3 European Commission, Joint Research Centre, Retieseweg 111, B - 2440 Geel, Belgium
* e-mail: aolacel@tandem.nipne.ro
Published online: 30 September 2020
A natural nickel sample was used at the GELINA (Geel Electron LINear Accelerator) neutron source of the European Commission, Joint Research Centre, Geel to measure the neutron inelastic cross sections. The GAINS (Gamma Array for Inelastic Neutron Scattering) spectrometer was employed to detect the emitted γ rays while a 235U fission chamber monitored the neutron flux. We report the preliminary production cross sections corresponding to the first transitions in 58,60Ni in comparison with previously reported data and with TALYS 1.9 calculations performed using the default input parameters.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.