EPJ Web Conf.
Volume 239, 2020ND 2019: International Conference on Nuclear Data for Science and Technology
|Number of page(s)||6|
|Section||Validation of Evaluated Data|
|Published online||30 September 2020|
Validation of JEFF-3.3 and ENDF/B-VIII.0 nuclear data libraries in ANSWERS codes
Wood, Kings Points House, Queen Mother Square, Poundbury, Dorchester, Dorset, DT1 3BW, UK
* e-mail: email@example.com
Published online: 30 September 2020
The JEFF-3.3 and ENDF/B-VIII.0 evaluated nuclear data libraries were released in December 2017 and February 2018 respectively. Both evaluations represent a comprehensive update to their predecessor evaluations. The ANSWERS Software Service produces the MONK® and MCBEND Monte Carlo codes, and the WIMS deterministic code for nuclear criticality, shielding and reactor physics applications. MONK and MCBEND can utilise continuous energy nuclear data provided by the BINGO nuclear data library and MONK and WIMS can utilise broad energy group data (172 group XMAS scheme) via the WIMS nuclear data library. To produce the BINGO library, the BINGO Pre-Processor code is used to process ENDF-6 format evaluations. This utilises the RECONR-BROADR-PURR sequence of NJOY2016 to reconstruct and Doppler broaden the free gas neutron cross sections together with bespoke routines to generate cumulative distributions for the S(α,β) tabulations and equi-probable bins or probability functions for the secondary angle and energy data.
To produce the WIMS library, NJOY2016 is again used to reconstruct and Doppler broaden the cross sections. The THERMR module is used to process the thermal scattering data. Preparation of data for system-dependent resonance shielding of some nuclides is performed. GROUPR is then used to produce the group averaged data before all the data are transformed into the specific WIMS library format.
The MONK validation includes analyses based on around 800 configurations for a range of fuel and moderator types. The WIMS validation includes analyses of zero-energy critical and sub-critical, commissioning, operational and post-irradiation experiments for a range of fuel and moderator types. This paper presents and discusses the results of MONK and WIMS validation benchmark calculations using the JEFF-3.3 and ENDF/B-VIII.0 based BINGO and WIMS nuclear data libraries.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.