| Issue |
EPJ Web Conf.
Volume 248, 2021
V International Conference “Modeling of Nonlinear Processes and Systems“ (MNPS-2020)
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 6 | |
| Section | Mathematical Models in Natural Sciences | |
| DOI | https://doi.org/10.1051/epjconf/202124801018 | |
| Published online | 26 April 2021 | |
https://doi.org/10.1051/epjconf/202124801018
Plastic Flow in a Thin Layer: the Theory, Formulations of the Boundary- Value Problems and the Applications
1
Technological UniversityMIREA, RU-119484, Moscow, Russia
2
Moscow State Technological University “STANKIN”, RU-127055, Moscow, Russia
Published online: 26 April 2021
Two-dimensional, averaged over the thickness of the layer, mathematical theory of the spreading of a plastic layer on the plane has been studied. General and simplified mathematical formulations of boundary value problem were presented. The problem of plastic stretching of a strip by forces applied on its “clamped” ends was investigated. The analysis of various modes of the process was carried out, which are determined by both the total compression force of the ends and the total tensile force. Mathematical analogy between the process of the free spreading of a plastic layer on the plane and the process of heat transfer was studied. For known forms of a domain occupied by a thin plastic layer at the initial time and for a given law of convergence of the plates, the evolution of the boundary of a plastic layer spreading was described. The exact particular solutions of the aforementioned problem was obtained.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.