EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||7|
|Published online||08 September 2021|
Impact of DIC biases on the selection process of a unique test for anisotropic plasticity characterization
DMAS, ONERA, F-59014 Lille - France
2 Univ. Polytechnique Hauts-de-France, LAMIH, CNRS, UMR 8201, 59313, Valenciennes, France
3 INSA, Hauts-de-France, F59313 Valenciennes, France
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
The exploitation of field measurements with inverse identification methods may reduce the number of required tests to characterize complex material constitutive models, provided that the generated stress field is sensitive enough to the targeted material parameters. For anisotropic elastoplastic material, the objective is to generate various stress states in the specimen through a single test. In this study, the effect of Digital Image Correlation measurement biases on the selection of the most suitable specimen geometry for characterisation of a complex anisotropic plasticity criterion using a unique uniaxial tensile test is investigated. To this aim, finite element (FE) based synthetic images are generated and DIC is used on these images. The biases in DIC measurement result in biased stress states that may cause errors in identification results.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.