EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||08 September 2021|
Extending the annular in-plane torsional shear test specimen to applications at high strain rates
Blast Impact & Survivability Research Unit (BISRU), Department of Mechanical Engineering, University of Cape Town (UCT), South Africa
2 Centre for Research in Computational and Applied Mechanics (CERECAM), Department of Mechanical Engineering, UCT, South Africa
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
In-plane torsional shear testing is a well-established material testing technique in the metal forming community. The corresponding specimen is designed to be machined from sheet metal with a continuous annular shear zone intended to deform in simple shear. Consequently, there are no geometric discontinuities or “edge-effects” to induce volumetric changes or instabilities with the result that large true plastic strains up to 1.0 can be achieved. This paper presents an extension of the in-plane torsional shear test to the dynamic regime. Dynamic experiments were performed using a torsional split Hopkinson bar (TSHB) on specimens manufactured from Al 1050 H14. The experimental results show that the adopted technique can be used to determine the material behavior accurately and reliably in the dynamic regime.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.