EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||09 September 2021|
Multi-instrumented dynamic loading experiments on laminated glass
Université Paris-Saclay, ENS Paris-Saclay, CNRS, LMT, 91190, Gif-sur-Yvette, France
2 Saint-Gobain Research Paris, 39 Quai Lucien Lefranc, 93303, Aubervilliers, France
3 Saint-Gobain Research Compiègne, 1 rue de Montluçon, 60777, Thourotte, France
* Corresponding author: email@example.com
Published online: 9 September 2021
Describing quantitatively the response of laminated glass to low-velocity (~5 m/s) impacts by rigid bodies is an important issue because of its significance in terms of structural degradation and integrity, key parameters for people safety and anti-intrusion performances. This study aims to address the formation of cracks during graveling and steel ball drop tests, so, two well-instrumented experimental set-ups are proposed to study cracking in reproducible conditions. The first device can be seen as a mini-Hopkinson bar system, which from two strain gauges, allows to estimate force and velocity at a sharp indent tip. The second device, reproducing a blunt impact, exploits stereo-Digital Image Correlation (D.I.C.) measurements of the laminated glass surface.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.