EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)
|Modelling & Numerical Simulation
|09 September 2021
Ballistic impact on concrete slabs: An experimental and numerical study
Structural Impact Laboratory (SIMLab), Department of Structural Engineering, NTNU – Norwegian University of Science and Technology, Trondheim, Norway
2 Centre for Advanced Structural Analysis (CASA), NTNU, Trondheim, Norway
3 Research and Development Department, Norwegian Defence Estates Agency, Oslo, Norway
* Corresponding author: email@example.com
Published online: 9 September 2021
The ballistic perforation resistance of 50 mm thick concrete slabs impacted by 20 mm diameter ogive-nose steel projectiles is investigated experimentally and numerically. Three commercially produced concretes with nominal unconfined compressive strengths of 35, 75 and 110 MPa were used to cast material test specimens and slabs. After curing, ballistic impact tests were carried out to determine the ballistic limit curve and velocity for each slab quality. Material tests instrumented with digital image correlation (DIC) were conducted along the ballistic impact tests. DIC measurements were used to establish engineering stress-strain curves for calibration of a modified version of the Holmquist-Johnson-Cook concrete model. Finite element simulations of the impact tests gave good conservative predictions.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.