EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Section||Modelling & Numerical Simulation|
|Published online||09 September 2021|
Influence of material properties on the performance of blast-loaded steel plates with pre-cut defects
Structural Impact Laboratory (SIMLab), Department of Structural Engineering, NTNU – Norwegian University of Science and Technology, Norway
2 Centre for Advanced Structural Analysis (CASA), NTNU, Norway
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
Experimental and numerical investigations are carried out to determine how thin steel plates with pre-cut defects behave under blast loading. The defects considered in this study are represented by four square holes, symmetrically distributed around the centre of the target plates. The target plates were manufactured from two types of steel, i.e., a dual-phase medium strength steel and a high-strength martensitic steel. A shock tube facility was used to expose the plates to blast-like loading conditions. The experiments showed that both the blast resistance and the corresponding fracture mode changed with material properties. Numerical simulations were performed using the finite element code LS-DYNA, where the numerical results were found to be in good agreement with the experimental data in predicting the ductile fracture during the blast-structure interaction. The numerical simulations confirmed that significant work hardening will distribute the plasticity throughout the plate material during deformation, while limited work hardening will tend to localize the plasticity that results in earlier fracture.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.