EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||09 September 2021|
Effect of ceramic particles on the dynamic strength, deformation and toughness behavior of 42CrMo4
Institute of Materials Engineering, TU Bergakademie Freiberg, 09599 Freiberg, Germany
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
In this study, the effect of non-metallic inclusions on the material behavior of 42CrMo4 was investigated. By adding aluminum oxide particles to steel powder, different inclusion contents were simulated. The mechanical and fracture toughness properties were measured under dynamic loading. The damage was examined using the acoustic emissions. With an increasing inclusion content, a decreasing strength, deformability and fracture toughness were observed. The distribution of the inclusions along the surfaces of the prior steel particles lead to small distances between inclusions and favors the initiation of cracks at low stress. The early appearance of material damage was proven by acoustic emissions.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.