EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||7|
|Published online||09 September 2021|
On the mechanical behaviour of additively manufactured metamaterials under dynamic conditions
Department of Materials Science, ETSI de Caminos, Canales y Puertos, Universidad Politécnica de Madrid, C/ Profesor Aranguren 3, 28040 Madrid, Spain.
2 Research Center for Structural Materials (CIME), Universidad Politécnica de Madrid, C/ Profesor Aranguren 3, 28040 Madrid, Spain.
3 Department of Aerospace Materials and Manufacturing, ETSI de Aeronaútica y del Espacio, Universidad Politécnica de Madrid, Plaza Cardenal Cisneros 3, 28040 Madrid, Spain.
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
High-energy absorption and light-weightiness are two critical properties for impact protection in the aerospace sector. In the past, the use of periodic honeycomb structures or random porous metallic foams were the preferred route to obtain a good specific-energy absorption performance. In recent years, the use of additive manufacturing has increased the design freedom creating a new generation of reticulated and porous materials: the metamaterials or lattice materials. The internal geometries of these lattice structures can be tuned for superior optimal properties, e.g., energyabsorption and density. However, the mechanics of these materials under impact need to be understood with the purpose of mechanical optimisation, and the computational models validated. In this work, we present the experimental compressive behaviour, at room temperature, of two Ti6Al4V lattice structures under static and dynamic conditions. The quasi-static tests were performed by using a universal testing machine while the dynamic tests were conducted at 480s-1 with a split-Hopkinson bar. In all cases, the deformation process was filmed to analyse the failure. Finally, finiteelement simulations were done, employing the Johnson-Cook model, to describe the response of the alloy. The simulations were able to reflect the failure characteristics of each metamaterial but were not able to describe the macroscopic response due to the differences between the experimental and computational volume fraction.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.