EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||09 September 2021|
Modern high strength steels under high strain-rate regimes
DynaMat SUPSI Laboratory, University of Applied Sciences and Arts of Southern Switzerland, Via Francesco Catenazzi 23, 6850 Mendrisio, Switzerland.
* e-mail: firstname.lastname@example.org
Published online: 9 September 2021
In order to properly design critical infrastructures and buildings in steel (bridges, high-rise building, off-shore, cranes, etc.), certain requirements concerning to mechanical resistance and robustness under exceptional actions have to be carefully fulfilled. An acceptable level of safety must be assured to avoid human loss, environmental pollution and material damage. These structures can be subjected to severe accidental loading such as blast or impact. In this context it is fundamental to adequately know the behaviour of structural steel under high strain rate. Modern high strength steels are quenched and selftempered steels. These steels have several layers with differentiated microstructures (martensitic in the cortical part and ferritic in the core). The behaviour of the single layer at high strain rate regimes have to be accurately studied. The paper collects and discusses the tensile results at high strain rate obtained on samples of homogeneous layers of S690QL and S960QL steels. Finally, the characterisation of the single layers has been used in order to analyse the results obtained in large specimen obtained from slabs 12mm thick.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.