EPJ Web Conf.
Volume 253, 2021ANIMMA 2021 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
|Number of page(s)||4|
|Published online||19 November 2021|
Production and Monitoring of Neutron Flux by Activation Detectors
Uzhgorod National University, Ukraine
2 Brno University of Technology, Czech Republic
Corresponding author: firstname.lastname@example.org
Published online: 19 November 2021
The neutron generation technique was tested on the microtron M-10 with an output electron beam of 8.7 MeV. Given the low energy that the microtron can provide to electrons, the bremsstrahlung induced photonuclear reaction 9Be (γ, n), which has a low threshold, was chosen for neutron generation. Cobalt and indium targets were tested as activation detectors to estimate the neutron flux density. In the cobalt target, the isomeric state of 60mCo with an energy of 58.6 keV and a half-life of 10.5 minutes is well activated. Two well-known additional gamma lines of standard cobalt source permit to clarify the absolute value of the neutron flux. The activated indium target has four gamma lines bound to the 116mIn isomer β- decaying with the half-life of 54.4 minutes, what is convenient for measurement of gamma spectrum. Despite the low energy of the output electron beam, at a beam intensity of 5 μA it is possible to obtain an almost isotropic neutron flux of 107 n/(s∙cm2).
Key words: Neutron production / microtron / gamma spectroscopy / neutron activation detectors
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.