EPJ Web Conf.
Volume 264, 2022EFM21 – 15th International Conference “Experimental Fluid Mechanics 2021”
|Number of page(s)||6|
|Published online||11 July 2022|
Dual-capillary dilatometer for density measurements of supercooled water
Institute of Thermomechanics of the Czech Academy of Sciences, Dolejškova 1402, 182 00 Prague 8, Czech Republic
* Corresponding author: email@example.com
Published online: 11 July 2022
An apparatus tailored to accurate density measurements of supercooled water, i.e. liquid water in a metastable state below the freezing point temperature, was recently developed at the Institute of Thermomechanics of the Czech Academy of Sciences. The apparatus, dual-capillary dilatometer, is described, together with the measurement procedure and the evaluation methodology. The primary result of the dual-capillary method are relative densities with respect to the density at a reference temperature and given pressure. In order to calculate absolute densities, densities at the reference temperature as a function of pressure are needed. For calculation of such pressure dependence of density, so called thermodynamic integration involving literature thermodynamic data and our experimental results is used. The dual-capillary dilatometer was successfully employed in density measurements of ordinary water, heavy water and seawater. The data in the temperature range from 238.15 to 303.15 K at pressures from atmospheric up to 200 MPa are presented and compared with respective IAPWS formulations of thermodynamic properties. The data for ordinary water are also compared with an accurate equation of state for supercooled water of Holten et al. (2014) revealing good mutual agreement. The expanded uncertainty of relative densities acquired by means of the dual-capillary method is estimated to be lower than 50 ppm.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.