EPJ Web Conf.
Volume 264, 2022EFM21 – 15th International Conference “Experimental Fluid Mechanics 2021”
|Number of page(s)||4|
|Published online||11 July 2022|
CFD analysis of an anemometric sensor design for air flow measurement in a heat exchanger
University of West Bohemia, NTC, Univerzitni 8, 301 00 Plzen, Czech Republic
2 4JTech s.r.o., Ringhofferova 115/1, 155 21 Praha, Czech Republic
* Corresponding author: email@example.com
Published online: 11 July 2022
This paper focuses on the issue of flow measurement in automotive heat exchangers. The measurement is complicated due to the limited space in the heat exchanger area and the non-uniform velocity profile. Therefore, only some measuring techniques can be used, which must be adapted to the specific conditions. The paper presents the initial stages of the development of a sensor for measuring the flow in a heat exchanger. These are CFD simulations used to determine the nature of the flow around the sensor and verify its effect on the flow field in its surrounding and on the entire heat exchanger. The results of these initial simulations are presented and discussed.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.