| Issue |
EPJ Web of Conf.
Volume 284, 2023
15th International Conference on Nuclear Data for Science and Technology (ND2022)
|
|
|---|---|---|
| Article Number | 08012 | |
| Number of page(s) | 4 | |
| Section | Nuclear Data for Reactors | |
| DOI | https://doi.org/10.1051/epjconf/202328408012 | |
| Published online | 26 May 2023 | |
https://doi.org/10.1051/epjconf/202328408012
Nuclear Data Uncertainty Analysis to Meet the Target Accuracy Requirements on the MYRRHA keff
1 Belgian Nuclear Research Centre (SCK CEN), Nuclear Systems Physics Expert Group, 2400 Mol, Belgium
2 Universidad Politécnica de Madrid (UPM), Departamento de Ingeniería Energética, 28009 Madrid, Spain
* Corresponding author: pablo.romojaro@sckcen.be
Published online: 26 May 2023
MYRRHA is a flexible experimental facility being designed at the SCK CEN, in Mol, Belgium. Cooled by lead-bismuth, it is conceived to operate both in sub-critical mode, as an accelerator driven system, and in critical mode, as a fast reactor. In order to comply with MYRRHA reactor design requirements, uncertainties due to nuclear data must be quantified. Significant gaps between the uncertainties and the target accuracies have been systematically shown in the past. In this paper, first, a Sensitivity and Uncertainty analysis with JEFF-3.3 nuclear data library of the effective neutron multiplication factor keff of the latest MYRRHA reactor design - v1.8 - is presented. Then, since target accuracy for keff of 300 pcm is exceeded, a Target Accuracy Requirement assessment is performed in order to find out the required accuracy on cross section data to meet the requested target accuracy. To reach the requested target accuracy, a reduction of the uncertainty in the fission and capture cross sections of 240Pu JEFF-3.3 evaluation is needed.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.